Synco Mic-M2S
The SYNCO Mic-M2S is an ultra-compact camera-mount shotgun microphone that improves sound quality and noise reduction without adding any weight to your rig. It has a cardioid polar pattern that focuses on sound in front of the mic while attenuating background sound entering from the rear giving detailed audio.
The 100Hz low cut filter rolls off unpleasant noises like current, conditioner or fan sound, and vibrations noises. The 76db relatively high SNR restores the signal details as much as possible. The real-time LED indicator makes it simple and reliable to control. It is packed with an effective wind muff and a shock mount that minimizes air interference. It has been powered by a AAA alkaline battery; it works continuously for 90-110 hours. Long life span meets long-time filming needs, from day to night. The 100Hz switchable high-pass filter eliminates ambient noises such as current sound and airflow noises; the 76dB relatively high SNR restores the signal details as much as possible; the metal construction locks out RF interference. All this cuts down on interferences destroying the recording and improves the sound performance. The LED indicator is intended to simplify the use of this microphone for camera. It turns “green” when the microphone is powered-on and “blue” if the high-pass filter is on. Just focus on your shooting and be kept aware of how your mic is performing. The 32g light and small device fits on the camera securely using a cold shoe or the 1/4” screw hole. It adds no weight to the small mobile devices and doesn’t hinder your movement. The 3.5mm TRS/TRRS cables allow the camera shotgun mic to directly connect to most 3.5mm input DSLR cameras, recorders, smartphones, etc. Just 1 AAA alkaline battery is needed to support 90-110 hours (= about 4 days) continuous working of the SYNCO M2S. The included wind muff and shock mount made of silicon rubber helps minimize the air interference and helps mitigate unwanted shocks and vibrations. All this makes it the best camera mic for outdoor shooting.
Performance Guaranteed
Working Status Indicator
Multi-Device Compatibility
Suited to Outdoor Shooting
Downloads
Specifications
Transducer
Electret Condenser
Frequency Response
35Hz-18KHz
Dynamic Range (Typical)
90dB
Signal/Noise
76dB
Maximum SPL
120dB
Sensitivity
-35dB±3dB/ 0dB=1V/Pa,1KHz
Power Requirement
AAA Battery x 1
Output Connector
3.5mm TRS
Battery Life
100h
Dimensions (L x Diam)
90×20.5mm
Weight
32g